×

Click for
Table of Contents

menuUDM-Pro quick start guide

Package Contents

UniFi Dream Machine Pro
Rack-Mount Brackets (Qty. 2)
Bracket Screws (Qty. 8)
Mounting Screws (Qty. 4)
Cage Nuts (Qty. 4)
Security Screw
2.5" HDD Screws (Qty. 4)
Power Cord
Rubber Feet (Qty. 4)

System Requirement

Either of the following is required:

Hardware Overview

Touchscreen Display

Bootup Animation

Initializing.

Location Animation

This indicates that you clicked Locate in the UniFi Controller software. The software will also display the location of the device on the map.

HDD LED

Flashing White

Indicates Read/Write Activity

Steady Amber

Indicates HDD Error

RJ-45 Speed/Link/Activity LED (Ports 1 - 9)

Off

No Link

Amber

Link Established at 10/100 Mbps

Flashing Indicates Activity

Green

Link Established at 1 Gbps

Flashing Indicates Activity

SFP+ Speed/Link/Activity LED (Ports 10 - 11)

Off

No Link

Green

Link Established at 1 Gbps

Flashing Indicates Activity

White

Link Established at 10 Gbps

Flashing Indicates Activity

HDD Bay

Install a 3.5" or 2.5" HDD (not included) to use the device as an NVR for UniFi Protect.

RJ45 LAN (Ports 1 - 8)

The RJ45 ports support 10/100/1000 Ethernet connections. By default, they are set to DHCP Server with the fallback IP address, 192.168.1.1/24.

RJ45 Internet (Port 9)

The RJ45 port supports a 10/100/1000 Ethernet connection. Set to DHCP Client by default.

SFP+ Internet (Port 10)

The SFP+ port supports a 1/10G Ethernet connection. Set to DHCP Client by default.

SFP+ LAN (Port 11)

The SFP+ port supports a 1/10G Ethernet connection. By default, it is set to DHCP Server with the fallback IP address, 192.168.1.1/24.

Reset Button

Resets to factory defaults. The device should be running after bootup is complete. Press and hold the Reset button for about 10 seconds until the display indicates that the device has reset itself. After a few seconds, the LED will turn off, and the device will automatically reboot.

USP RPS LED

Reserved for future use.

USP Connect DC Input

Reserved for future use.

Power Port

Connect the included Power Cord to the Power port.

Installation Requirements

Installing an HDD

Ensure the device is powered off before you install the 3.5" or 2.5" HDD (not included).

  1.  
  2. OR

Removing an 3.5" HDD

Hardware Installation

  1.  
  2. OR

Connecting Power

Connecting to the Internet

For information about compatible fiber SFP modules, visit: ubnt.link/UniFi_SFP_DAC_Compatibility

OR

Connecting to the LAN

Configuration

You have the following options:

UniFi Network App

  1.  
  2. Follow the on-screen instructions.

Chrome Instructions

Use the Chrome web browser to set up your device.

  1. Ensure that your host system is on the same Layer 2 network as the UDM-Pro.
  2. Launch the Chrome web browser and go to https://setup.ui.com

  3. Follow the on-screen instructions of the Setup Wizard.

After you run the UniFi Setup Wizard, a login screen will appear for the UniFi Network Controller management interface. Enter the Username and Password that you created in the UniFi Setup Wizard. Then click Sign in.

You can manage your network and view network statistics using the UniFi Network Controller management interface.

Specifications

UDM-Pro

Dimensions

442.4 x 43.7 x 285.6 mm

Weight

3.90 kg

With Mount Brackets3.99 kg

Interfaces

Networking(8) 10/100/1000 RJ45 LAN Ports
(1) 10/100/1000 RJ45 WAN Ports
(1) 1/10G SFP+ LAN Port
(1) 1/10G SFP+ WAN Port
ManagementEthernet In-Band
(1) Bluetooth BLE

Max. Power Consumption

33 W

Power Method

(1) Universal AC Input, 100 to 240 VAC

(1) RPS DC Input

Power Supply

Internal 50 W / 12 V

Supported Voltage Range

100 - 240 VAC

Display

1.3" Color Touch Panel

LED

SystemStatus
HDDActivity
RJ45Link / Speed / Activity
SFP+Link / Speed / Activity

Processor

Quad ARM Cortex-A57 Core at 1.7 GHz

System Memory

4 GB DDR4

On-Board Flash Storage

16 GB eMMC

Operating Temperature

-10 to 40 °C

Operating Humidity

5 to 95 % Noncondensing

Certifications

CE, FCC, IC